| AquaSPArkle Pure Spa Salt is graded to be suitable for use with spa salt water sanitising systems. Adding AquaSPArkle Pure Spa Salt to your hot tub enables the sanitising system to generate free... |
| | | The ideal spa pH level is between 7.2 - 7.6, promoting bather comfort, optimal chemical efficiency and protection of spa equipment. AquaSPArkle Spa pH Plus is a granular alkali used for raising the... |
|
| The ideal spa pH level is between 7.2 - 7.6, promoting bather comfort, optimal chemical efficiency and protection of spa equipment. AquaSPArkle pH Minus is a granular acid used for lowering the pH if... |
| | AquaSPArkle Spa Non-Chlorine Shock is a granular product that is ideal for regular oxidation of your spa water. As this doesn't increase chlorine or bromine levels, bathing can resume shortly after... |
| | Sunbeach Spas Rapid Shock is a fast-dissolving granular chlorine product used for the oxidation of your spa water, eliminating bather wastes and contaminates. |
|
| Reduces chlorine and bromine
Fast acting crystal
Problem solver |
| | These traditional stabiliser free shock chlorine granules are ideal to help purge pool water of bather wastes and can also be used to prevent and destroy algae. Suitable for both indoor and outdoor... |
| | A traditional stabiliser-free granular shock.
Destroys swimmer wastes and helps prevent/kill algae.
Stabiliser-free. |
|
| A traditional stabiliser-free granular shock
Destroys swimmer wastes and helps prevent/kill algae
Stabiliser-free |
| | Settles unwanted debris to pool floor.
A traditional problem solver.
Aids in the removal of algae. |
| | A granular acid for lowering the pH of pool water
The ideal pool pH level is between 7.2 - 7.6, promoting bather comfort, optimal chemical efficiency and protection of pool plant equipment. |
|
| A powdered product for increasing the pH of pool water.
The ideal pool pH level is between 7.2 - 7.6, promoting bather comfort, optimal chemical efficiency and protection of pool plant equipment.... |
| | A fast-acting alternative to traditional floc granules
Settles debris to the pool floor for easy removal
Apply directly to pool – no pre-dissolving needed |
| | The phenol red indicator method provides a simple colourimetric means of pH determination for neutral and slightly alkaline waters over
the range 6.8 - 8.4 units. The Phenol Red pH test is... |
|