| AquaSPArkle Pure Spa Salt is graded to be suitable for use with spa salt water sanitising systems. Adding AquaSPArkle Pure Spa Salt to your hot tub enables the sanitising system to generate free... |
| | AquaSPArkle 4-Way test strips provide a quick and easy way to test your hot tub water. They offer tests for free chlorine, bromine, pH and total alkalinity. Simply dip the strip in the water and remove immediately. Hold horizontally for 15 seconds (do not shake excess water from strip), then compare the colour pads with the chart on the test strip bottle. |
| | A fast dissolving and fast acting, chlorine-free shock granule to Destroy swimmer wastes |
|
| The ideal spa pH level is between 7.2 - 7.6, promoting bather comfort, optimal chemical efficiency and protection of spa equipment. AquaSPArkle Spa pH Plus is a granular alkali used for raising the... |
| | The ideal spa pH level is between 7.2 - 7.6, promoting bather comfort, optimal chemical efficiency and protection of spa equipment. AquaSPArkle pH Minus is a granular acid used for lowering the pH if... |
| | AquaSPArkle Spa T.A. Plus is a fine, rapid-dissolving powder used for increasing the total alkalinity of your spa water. Apply when total alkalinity falls below 80mg/l (ppm). |
|
| AquaSPArkle Spa Hardness Plus is an effective product used for increasing calcium hardness levels within your spa water. |
| | AquaSPArkle Spa Non-Chlorine Shock is a granular product that is ideal for regular oxidation of your spa water. As this doesn't increase chlorine or bromine levels, bathing can resume shortly after... |
| | Sunbeach Spas Rapid Shock is a fast-dissolving granular chlorine product used for the oxidation of your spa water, eliminating bather wastes and contaminates. |
|
| Completely removes all chlorine and bromine from your Hot Tub or Pool with fast acting crystals. |
| | A traditional stabiliser-free granular shock.
Destroys swimmer wastes and helps prevent/kill algae.
Stabiliser-free. |
| | A traditional stabiliser-free granular shock
Destroys swimmer wastes and helps prevent/kill algae
Stabiliser-free |
|
| Settles unwanted debris to pool floor.
A traditional problem solver.
Aids in the removal of algae. |
| | A granular acid for lowering the pH of pool water
The ideal pool pH level is between 7.2 - 7.6, promoting bather comfort, optimal chemical efficiency and protection of pool plant equipment. |
| | A fast-acting alternative to traditional floc granules
Settles debris to the pool floor for easy removal
Apply directly to pool – no pre-dissolving needed |
|
